The advantages of reciprocating spraying production line are: time-saving, labor-saving, and material saving, with extremely high efficiency, very suitable for large-area workpiece spraying and large-scale production.

The combination of our spray production line mainly considers the product itself, the use of paint, and the customer's site.

Today, we will talk about the differences in paint and how the production line matches. In our industry, most customers choose UV, PU, WB, NC, PE and others.

If you are using UV paint, our production line is equipped with a belt conveyor - dust collector - reciprocating spraying machine - infrared drying tunnel - curing machine - belt conveyor. This is a very standard production line, with the purpose of uplaoding - removing dust from the surface of the product - spraying UV paint (with a paint recycling system that can be reused) - leveling the surface and drying the paint - instantly curing.

If you are using PU/WB/NC paint, our production line is equipped with a belt conveyor - dust collector - reciprocating sprayer - infrared drying oven - belt conveyor. The purpose is to load - remove dust from the surface of the product - spray PU/WB/NC paint - make the paint level and dry the surface - download. Afterwards, it will be sent to the drying room. This is different from the production line of UV paint because the characteristics of the paint are different. UV paint combined with a UV curing machine can instantly cure the paint within 3-5 seconds, and the product can be touched immediately without affecting the coating effect. PU/WB/NC paint belongs to the self-drying type of paint, and finally sending it to the drying room for drying is a good choice.

If you use other special paints, such as anti-fingerprint paint, we will consider using different spray guns on the reciprocating spraying machine, and the production line will also be equipped with infrared short-wave drying channels and air coolers.