|Wooden line spray painting machine||TXP-W||TXP|
|MAX working thickness||100mm||100mm|
|MIN working length||420mm||420mm|
|MAX working width||350mm||350mm|
|Electric motor||2, DELTA from Taiwan, China||2, DELTA from Taiwan, China|
|Electrical appliance||Chint from China||Chint from China|
|Air pressure||0.3mpa*3/0.3mpa*4, AINTAC from Taiwan, China||0.4mpa*4/0.4mpa*6, AINTAC from Taiwan, China|
|Spray gun||3/4, low pressure mixed air spray gun, GRACO from America||4/6, air spray gun, IWATA from Japan|
|Caliber of spray gun||φ1.0-1.5mm||φ0.9-1.3mm|
|Angle of spray gun||Manual adjustment||Manual adjustment|
|Paint pump||1, plunger type, 1:30, GRACO from America||1, vacuum diaphragm, 10L, from Taiwan, China|
|Control system||1, spray and PLC control system, LCD screen, Shihlin from Taiwan, China||1, spray and PLC control system, LCD screen, Shihlin from Taiwan, China|
Open the closed spray painting booth, there are two imprtant paint recycling structures. The extra liquid paint will stream into the paint sink under the conveyor, and other paint mist will be drawn out by top fan and filter behind. Three windows are convenient for observing and adjusting spray effect.
At the feed port, we added an infrared sensor for detecting board pass through, that will triggered it and the spray gun start working, otherwise they will close for saving paint. The guide conveyor is adjustable for limiting the position of wooden line.
The air pressure of each spray gun is adjustable accurate by the knobs and show on the barometer, which is helpful to control the volume of spray paint precisely. Usually we set each IWATA air spray gun at 6 and GRACO mixed air spray gun at 2.
Behind of the spray painting booth, the top fan collect paint mist and through the middle filter which are filled with honeycomb paper that make the mist liquid stream into bottom reclaim.