UV putty filling machine
| UV putty filling machine SL-TRP | Working width 600mm | Working width 800mm | Working width 1300mm |
| Overall dimensions(length*width*height) | 1850*1550*1750mm | 1850*1750*1750mm | 1850*2250*1750mm |
| Estimated weight | 1000kg | 1200kg | 1900kg |
| MAX working thickness | 100mm | 100mm | 100mm |
| MIN working length | 300mm | 300mm | 300mm |
| Working speed | 0-25m/min | 0-25m/min | 0-25m/min |
| Full power | 5.62kw + 2kw 380V 50HZ 3P | 5.62kw + 2kw 380V 50HZ 3P | 5.62kw + 2kw 380V 50HZ 3P |
| Rubber roller power | 1.5kw | 1.5kw | 1.5kw |
| Stainless steel roller power | 0.75kw | 0.75kw | 0.75kw |
| Stainless steel press roller power | 1.5kw | 1.5kw | 1.5kw |
| Conveyor power | 1.5kw | 1.5kw | 1.5kw |
| Lifting power | 0.37kw | 0.37kw | 0.37kw |
| Paint heating container | 2kw | 2kw | 2kw |
| Electric motor | 5, BMEMB from China | 5, BMEMB from China | 5, BMEMB from China |
| Frequency Converter | 4, DELTA from Taiwan, China | ||
| Electrical appliance | Chint from China | ||
| Main bearing | NSK from Japan | ||
| Application roller | 1, Rubber roller, EPDM, φ205mm, H45 degrees | ||
| Doctor roller | 1, Stainless steel roller, Chroming, φ200mm | ||
| Press roller | 1, Stainless steel roller, Chroming, φ300mm | ||
| Scraper blade | 1, 50*0.203mm, from Sweden | ||
| Conveyor | H850mm, T3mm, PU, Ammerraal from Holland | ||
| Working direction | Right to left | ||
| Paint pump | 1, 0.6mpa, 10L, Vacuum diaphragm pump from Taiwan | ||
| Control system | 1, Shihlin LCD screen, HMI, Chinese and English | ||
| One pass coating volume | UV 15g~40g/m2 | ||
| Paint recycling volume | Over 10kg | ||
-
Roller coating HMI
-
Roller quick disassembling
-
UV putty filling structure
-
Roller electric lifting button
-
Paint vacuum diaphragm air pump
-
Roller standard
· All the rubber roller and stainless steel roller checked the dynamic balance in case of rotating and coating irregular.
· Rubber roller checked without any harm on surface and whole uniform hardness around.
· Stainless steel roller with chormed process like mirro and evenly surface. -
-
Roller quick disassembling
Each rubber roller connect to the motor by NSK bearing with ceramics protective shield. Design quick disassembling structure that convenient to repair or change rubber roller.
-
Dovetail groove roller lift
The roller apply dovetail groove structure lifting instead of screw drive structure, roller lifting controlled by electric button that stably and easily. Assist by hand wheel ensure more accurate.
-
Push screw compensator
When push the gap between the application rubber roller and doctor steel roller, this screw compensator device can easily adjust balance to ensure the whole gap keep the same.
-
Roller scraper
Sweden thin scraper blade with good flexibility that can remove any impurity and keep even paint on roller during work, uniform screw on the grip ensure stable blade and adjust accurately.
-
Electric motor and reducer
Each roller driven by independent electric motor which stable and durable, with double worm gearing reducer that translate power more smooth and accurately to the roller rotate.
-
Low voltage apparatus
All the electrical low voltage apparatus concentrate orderly and clearly inside the bottom of machine body, far away from working influence and easily to check or maintenance.
-
Thickness detector
While the thickness of boards over too much than set data, the sensor at the feeding entry will detect and stop the conveyor immediately in case of harm rubber roller.
-
Paint heating container
Warm UV paint get better coating effect, this stainless steel container with temperature controller heating water around 50℃ and keep the liquid recycling UV paint as best situation.
-
Roller water heating system(Option)
In some cold environment, consider add water heating system heating the doctor steel roller keep UV paint warm on the roller for recycling coating, increase the coating effect a lot.
