Two face thin roller coating machine
Two face thin roller coating machine

Two face thin roller coating machine

Model:  SL-TRST
Function:  it applies the two application rubber roller and doctor stainless steel roller up and down to cover the liquid paint on two face of sheet circularly evenly, design special conveyor after coating to prevent harm paint layer on the back of sheet.
It is suitable to fine coating flat sheet which very thin and slight, low coating effect requirement of sheet back.


· Application sheet:
  metal plate, wood veneer, glass, etc.
· Application paint:
  UV, water based paint, PU, PE, NC, AC, special paint, etc.

TECHNICAL PARAMETERS

These technical parameters are based on different working width of standard models, and for reference only. Your customization is available.
Two face thin roller coating machine SL-TRST Working width 600mm Working width 800mm Working width 1300mm
Overall dimensions(length*width*height) 1790*1515*1445mm 1790*1715*1445mm 1790*2215*1445mm
Estimated weight 1000kg 1200kg 1900kg
MIN working thickness 0.3mm 0.3mm 0.3mm
MIN working length 300mm 300mm 300mm
Working speed 0-25m/min 0-25m/min 0-25m/min
Full power 4.87kw + 12kw  380V 50HZ 3P 4.87kw + 12kw  380V 50HZ 3P 4.87kw + 12kw  380V 50HZ 3P
Rubber roller power(up and down) 1.5kw*2 1.5kw*2 1.5kw*2
Stainless steel roller power(up and down) 0.75kw*2 0.75kw*2 0.75kw*2
Lifting power 0.37kw 0.37kw 0.37kw
Paint heating container 6kw*2 6kw*2 6kw*2
Electric motor 5, Explosion proof, GPG from China 5, Explosion proof, GPG from China 5, Explosion proof, GPG from China
Frequency Converter 4, DELTA from Taiwan, China
Electrical appliance    Chint from China
Main bearing NSK from Japan
Application roller 1+1, Rubber roller, EPDM or PU, φ205mm, H45 degrees
Doctor roller 1+1, Stainless steel roller, Chroming, φ200mm
Scraper blade 1+1, 50*0.203mm, from Sweden
Conveyor H850mm, Rubber roller, EPDM, φ205mm
Paint pump 2, 0.6mpa, 10L, Vacuum diaphragm pump from Taiwan
Control system 1, Shihlin LCD screen, HMI, Chinese and English
One pass coating volume 10g~30g/m2
Paint recycling volume Over 10kg

CONFIGARATIONS

Different configurations to meet various demands and investment. Your customization is available.
  • SL-TRST
  • Roller coating HMI

    Roller coating HMI

  • Top roller coating structure

    Top roller coating structure

  • Back roller coating structure

    Back roller coating structure

  • Roller electric lifting button

    Roller electric lifting button

  • Explosion proof motor

    Explosion proof motor

  • Automatic roller lifting

    · We offer most rubber roller optional that expert to meet various paint, board material and coating effect.

    · According to different coating thickness demands, you can choose single, double, three or special roller structure.

    · Configuration also flexible based on standard machine, customized function is able to design and come true.

  • Roller quick disassembling

    Each rubber roller connect to the motor by NSK bearing with ceramics protective shield. Design quick disassembling structure that convenient to repair or change rubber roller.

  • Electric dovetail groove lifting

    The roller apply dovetail groove structure lifting instead of screw drive structure, roller lifting controlled by electric button that stably and easily. Assist by hand wheel ensure more accurate.

  • Push screw compensator

    When push the gap between the application rubber roller and doctor steel roller, this screw compensator device can easily adjust balance to ensure the whole gap keep the same.

  • Scraper blade

    Sweden thin scraper blade with good flexibility that can remove any impurity and keep even paint on roller during work, uniform screw on the grip ensure stable blade and adjust accurately.

  • Thorns roller conveyor

    After two face coating, special thorns roller conveyor can easily translate the thin sheet withour harm back coating paint, minimize the contact area between conveyor and sheet.

  • Paint recycling system

    Top roller coating and back roller coating paint are seperated supply and collect together that convenient to recycling use and clean the stainless steel tank after work.

  • Electrical appliance

    All the electrical appliance concentrate orderly and clearly inside the bottom of machine body, far away from working influence and easily to check or maintenance.

  • Explosion proof motor with reducer

    Apply expert explosion proof motors that more safer for expert paint, with double worm gearing reducer that translate power more smooth and accurately to the roller rotate.

  • Paint heating container

    Warm UV paint get better coating effect, this stainless steel container with temperature controller heating water around 50℃ and keep the liquid recycling UV paint as best situation.

INQUIRY DETAILS *

INQUIRY NOW
  • captcha