|Automatic five axis spraying machine SL-TSP||SL-TSP-G||SL-TSP-K||SL-TSP-I|
|Working table rotate radius||1600mm|
|Working size include edges||400*400mm to 2200*1000mm|
|Working size exclude edges||400*400mm to 2400*1200mm|
|Working size exclude two ends||400*400mm to 2400*1000mm|
|Max working thickness||100mm|
|Independent spraying room size||6250*7500*2700mm|
|Full power||3.7kw 380V 50HZ 3P|
|X-axis power(left and right moving)||0.75kw|
|Y-axis power(back and front moving)||2kw|
|Z-axis power(lifting moving)||0.75kw|
|A-axis power(horizontal rotation)||0.1kw|
|B-axis power(pitching angle)||0.1kw|
|Servo electric motor||5, DELTA from Taiwan, China|
|Electrical appliance||Chint from China|
|Linear guide rail||HIWIN from Taiwan, China|
|Air cylinder||0.6mpa AINTAC from Taiwan, China|
|lubrication||Automatic ISHAN from Taiwan, China|
|Spraying guns||Primer or finish save 35% paint||Primer or finish save 30% paint||Primer or color repairing|
|1, low pressure air mix, GRACO, U.S.||1, air mix, KREMLIN, FRA||2, air, IWATA, JPN|
|Paint pump||1, plunger type, 30:1, GRACO, U.S.||1, plunger type, 20:1, KREMLIN, FRA||1, vacuum diaphragm type, 1:1, CHN.|
|Speed of spray gun||0-1500mm/s|
|Angle of spray gun||0-20 degree|
|Conveyor||Working table suitable to door or furniture|
|Working direction||Outside to inside|
|Control system||1, AMC 1600E motion controller + RPB07 hand held HMI + BMCA106 program, Chinese and English|
· We support GRACO, KREMLIN and IWATA spraying system as optional, each has its own feature and advantages.
· According to primer or finish application to choose most suitable spraying system ensure best effect.
· According to the paint application utilization ratio and investment choose the suitable spraying system.
This excellent head connect to the spray gun, combine three axis with another two axis on machine ensure spraying action accurately and flexible as human arm.
Instead of fixed control panel, this intelligent hand held HMI convenient to program once for all and easily to control suitable to regular work piece and able to spray shaped arch work piece.
For some mix color type spraying, we offer two function spraying guns as optional that one for color fixing and the other for clear spraying make the final color effect more vivid and even.
After work finished, just change the pump pipe into thinner barrel, click the clean then you can leave. Machine will clean the spraying gun, back to original place and shut down by itself.
HIWIN quiet and heavy load straight guide rail ensure fast spraying action and long distance working easily and smoothly, effective reduce working noise, working stably for 24 hours.
The ISHAN lubricating device automatically regular inject lubricant into the rail and flush the used away to ensure the spray rail keep its best without any pause or stop during work.
Design organ type rail at the working table convenient to regulate the width make it much more suitable to different length of work piece ensure better moving action.
The special damping device under the working table control the rotating and turn over act accurately, not only fast, but also with buffer function in case of move shaking influence work piece.
For some work piece which need spray all six sides, usually need insert steel bar at the two ends then easily fixed it on the working table to realize automatic turn over function.