|Single roller coating machine SL-TRL||Working width 600mm||Working width 800mm||Working width 1300mm|
|MAX working thickness||100mm||100mm||100mm|
|MIN working length||300mm||300mm||300mm|
|Full power||4.12kw 380V 50HZ 3P||4.12kw 380V 50HZ 3P||4.12kw 380V 50HZ 3P|
|Rubber roller power||1.5kw||1.5kw||1.5kw|
|Stainless steel roller power||0.75kw||0.75kw||0.75kw|
|Electric motor||4, BMEMB from China||4, BMEMB from China||4, BMEMB from China|
|Frequency Converter||3, DELTA from Taiwan, China|
|PLC||1, DELTA from Taiwan, China|
|Electrical appliance||Chint from China|
|Main bearing||NSK from Japan|
|Air cylinder||2, AIRTAC from Taiwan, China|
|Application roller||1, Rubber roller, PU or EPDM, φ205mm, H45 degrees|
|Doctor roller||1, Stainless steel roller, Chroming, φ200mm|
|Scraper blade||1, 50*0.203mm, from Sweden|
|Conveyor||H850mm, T3mm, PU, Ammerraal from Holland|
|Working direction||Right to left|
|Paint pump||1, 0.6mpa, 10L, Vacuum diaphragm pump from Taiwan|
|Control system||1, Shihlin LCD screen, HMI, Chinese and English|
|One pass coating volume||40g~80g/m2|
|Paint recycling volume||Over 10kg|
· Electric lifting the height of roller suitable to the thickness of board at first.
· The conveyor entry detect each board by phtosensitive sensor, with encoder translate signal to PLC calculate.
· PLC control the roller lifting down immediately by air cylinder and lifting up homing after coating.
Each rubber roller connect to the motor by NSK bearing with ceramics protective shield. Design quick disassembling structure that convenient to repair or change rubber roller.
The roller apply dovetail groove structure lifting instead of screw drive structure, roller lifting controlled by electric button that stably and easily. Assist by hand wheel ensure more accurate.
When push the gap between the application rubber roller and doctor steel roller, this screw compensator device can easily adjust balance to ensure the whole gap keep the same.
Sweden thin scraper blade with good flexibility that can remove any impurity and keep even paint on roller during work, uniform screw on the grip ensure stable blade and adjust accurately.
All the electrical appliance concentrate orderly and clearly inside the bottom of machine body, far away from working influence and easily to check or maintenance.
Each roller driven by independent electric motor which stable and durable, with double worm gearing reducer that translate power more smooth and accurately to the roller rotate.